Genuine Weber 34mm ICT 6 carburettor, made in Spain, not a cheap Chinese copy
We can now offer this carburettor with the standard jetting listed below, or re-jetted to suit the air-cooled VW engines:-
- 1300 – 1600cc (Standard jetting)
- 1601 – 1799cc
- 1800 – 2000cc
2 carburettors will need to be purchased for the above engine options.
This carburettor has not got a starting mechanism (choke) fitted.
Standard jetting is:-
- 29mm Venturi (fixed)
- 135 Main jet
- F6 Emulsion tube
- 160 Air corrector jet
- 40 Pump exhaust valve
- 55 Idle jet
- 50 Pump jet
- 1.50 Needle valve
We can re-jet this carburettor to suit your application, please contact us before ordering to discuss your requirements.
Replaces part number 15290.035
Dell’orto Spaco MA19BS7 carburettor
Original equipment on Lambretta L.I. 2a 150cc 1961
28mm diameter stub fitting.
Standard Jetting
- 50 Slide
- D21 Needle
- 260B Atomiser
- 78 Main jet
- 40 Idle jet
- 55 Starter jet
- 5561.00 5 gram Float
New old stock Dell’Orto ME 15BS complete carburettor. These carbs. are absolutely like new, a rare find…
Features:
Standard jetting:
- 70 Main jet
- 35 Idle jet
- 50 Slide
- G4 Needle
- 258A Atomiser
- 4.2g Float
Genuine Dell’orto spacer plate with paper gasket both sides.
Reduces heat transfer between carburettor and manifold.
Fits 32 DHLB & Solex 32 PHH As fitted to Lancia Fulvia.
Genuine Weber carburettor without choke control for racing applications, can be used if there is an existing functional choke control.
This carburettor has a fuel in and a fuel return pipe.
Standard jetting:
- 27 mm chokes
- 145 Main jets
- 45 Idle jets
- 170 Air correctors
- 70 Pump jets
- F50 Emulsion tubes
- 200 Needle valve
Genuine Weber carburettor, made in Spain – not a cheap Chinese copy.
Good quality stainless steel cone air filter with elements similar to K&N filters.
Dimensions:
- 120mm tall (4 3/4″)
- 60mm internal diameter (2 3/8″)
- 52-76mm Jubilee type clip
Non original part that can be used to replace fuel banjo p/n 5000.
Internal fuel filter 1435 cannot be used with this part.
Pipe size 6mm
Internal more 12mm
External depth 11.9mm
Mixture screw for late IMB Weber carburettors.
Internal fuel filter used in Weber carburettors type:
Weber push in trumpet gauze to suit Weber 44/48 IDF and 45 DCOE carburettors with standard trumpets.
The gauzes will not fit our exclusively made bolt-on aluminium trumpets except for the 48mm variations.
Supplied as a pair (2), trumpets/carburettor are not included and shown for illustration purposes only.
Dimensions:
- Diameter of the gauze retaining ring at its widest is 49mm
- Approximate height of the gauze dome above the seating ring is 24mm