Description
Twin Weber 34ICT carburettor kit to suit VW type 4 aircooled installations. Featuring CB Performance hexbar linkage and top quality CB Performance manifolds with balance pipe facility.
Genuine Weber 34 ICT carburettors – not Chinese copies.
Now fitted with F6 emulsion tubes and 150 needle valves
If you have been quoted a cheaper price they will either be Chinese made or not jetted to suit.
This kit includes:
- Genuine Weber 34 ICT carburettors jetted to suit.
- CB Performance type 4 manifolds with top and bottom gaskets, studs, nuts & washers.
- Quality metal rose joints with left and right hand threaded rod to give precise adjustment.
- Washable Air filters.
- Cast alloy air filter bases and tops.
- Heat insulators between carburettors and manifolds
- Blanking caps for carburettor vacuum take-offs
Approximate height of completed manifold/carburettor/air filter when assembled is 286mm from the centre of engine port.
Please mention engine size when ordering.
Due to increasing engine bay temperatures, especially with the extra heat created by the ethanol levels in modern fuels, and the inherently poor cooling system on an air cooled flat 4 engine, it is strongly recommended that insulation gaskets are used when fitting Weber conversions on these engines to minimize the chances of potential heat damage to the carburettors. The use of a fuel cut off solenoid is also advised, to avoid fuel syphoning into the engine due to the position of the fuel tank.
These carburettors are re-jetted to suit engine size. Please note that whilst this re-jetting works very well for 95% of applications based upon many years of experience, it is not guaranteed to be perfect in every instance. Some fine-tuning may occasionally be necessary.